ALL
STEEL FABRICATED AND IMPROVED DESIGN
For perfect alignment and stability. |
VERTICAL HINGED 120" LONG
PRESSING BOX
Entirely eliminates the difficult task of removing box for relining
or for replacement of worms, which saves lot of time and labour. |
STEEL CASTED CHAMBERS
Reduces time and labour for relining of Cage Bars. |
THE MAIN SHAFT
Of the Expeller is water cooled and is of alloy steel construction,
fitted with High Pressure Worms, hard faced, with a highly wear
resistant chromium cobalt alloy. The Worm arrangement has been
designed to expel the maximum recoverable oil from oil bearing
materials. |
COMPRESSOR
The feeding hopper has a vertical feed device, which compacts
the seed coming from the Cooker and press it uniformly into
the cage. |
THE CAKE AT THE DISCHARGE END
Of the main cage is controlled by a manually operated arrangement
which is so simple that the choke gear is independent of the
main drive and there is no possibility of a sudden load being
placed on expeller motor. |
| |
|
AN OIL
DISCHARGE CONVEYOR
Is fitted along the full length of the expeller having right
and left hand flights to deliver the oil to a central point.
The drive is from the main gear box. |
POWER
The power required to drive the 'UMAS' VIP MK-5 Expeller is
150 HP for single pressing/pre-pressing. |
GEAR BOX & LUBRICATION
A triple helical gear unit made from most suitable special steel,
running in oil bath. All shafts run in anti-friction bearings.
Drive housing is oil tight and dust-proof, totally enclosed
design and is fitted with level indicator. A self contained
lubrication arrangement has been provided. |
CAPACITY
The crushing capacity of 'UMAS' VIP MK-5 Oil Expeller is 50/60
tons per day in single pressing and 150 tons per day in pre-pressing
depending upon the material being crushed and the working conditions. |
KETTLE AND PRESSURE STEAM
The steam kettle is of adequate capacity with 5'-6" dia.,
five high pressure tested steam jackets fitted with self controlled
meal inlet to prevent overflowing, with steam spray arrangement
in top and bottom jackets, safety valve, steam pressure gauge,
steam traps, steam valves, an air venting connection and separate
motorised exhaust unit. The cooker has independent Gear Box
& Motor of 25 HP and 1.5 HP for aspiration system. |
|
